Pool & Spa Ionizer reduces chemicals by up to 90%
I have had this system for two years now and it works flawlessly! Water is perfect, no chlorine used at all. Would highly recommend unless you like using a very toxic and highly dangerous chemical like chlorine.
- Joe Nicola, MI, United States
The next generation of pool treatment (spas below)
The EPA, Health Canada and government agencies around the world recognize that chlorine and bromine are extremely effective at keeping your pool safe for swimming.
Unfortunately, chlorine is also a toxic chemical that studies show can cause you and your family harm.
ClearBlue Pool Ionizer reduces the chlorine concentration by up to 90%
ClearBlue is an extremely effective algaecide and also assists in controlling bacteria and viruses. This allows the chlorine in the water to work more effectively, so you can safely reduce the concentration to 0.5ppm - 0.6ppm from the 1ppm - 3ppm that is recommended with chlorine or salt alone.
Part of a complete system for lowering chlorine concentration
According to EPA and Health Canada, no approved pool sanitizer is 100% chlorine (or bromine) free. But with a ClearBlue, you can minimize the concentration while maintaining water that is safe for you and your family.
Combining ClearBlue with zinc-chlorine pucks and a non-chlorine shock provides a complete solution for controlling bacteria, algae and organic waste with a low overall chlorine concentration.
Lowers the chlorine concentration in “salt water pools”
You may not realize that “salt water pools” are actually high in chlorine. Salt-based chlorinators use the salt in the water to generate chlorine requiring a higher concentration than pools with ClearBlue.
ClearBlue in combination with salt-based chlorinators allows you to set the chlorine output to the lowest setting. This extends the life of expensive salt cells, while keeping the water clean and clear, even after heavy use.
Soft water, lower chlorine prevents drying and itching
ClearBlue releases microscopic mineral ions into the water which gives it a soft, comfortable feel. You won’t get the drying, itching and fading effect that can happen in pools with a higher chlorine concentration. The silver and zinc minerals in the water are also great for your skin. You’ll feel the difference right away.
Unaffected by pH and sunlight
Rising pH and intense sunlight can reduce the effectiveness of chlorine. ClearBlue ions maintain a consistent concentration under all pH and sun conditions giving you the peace of mind that your algae and bacteria are always being controlled – even if your chlorine level is low.
Easy, low cost pool maintenance
Once the ClearBlue Ionizer is installed, you set it and forget it. The electrodes that release silver, copper and zinc ions are replaced about once a year.
Safe for the environment
Water drained from a ClearBlue pool is completely safe and will not harm your surrounding plants or landscape.
The next generation of spa and hot tub treatment
The “Fountain of Youth” effect
ClearBlue releases silver ions into the water to help control bacteria and viruses. Silver has been used for centuries for medical equipment and wound dressings. Prior to the introduction of modern antibiotics, colloidal silver was used as a germicide and disinfectant. Since the beginning of the twentieth century surgeons routinely use silver sutures to reduce the risk of infection.
Today, ClearBlue combines ancient wisdom with modern technology to provide water that cleanses and rejuvenates the skin while you soak. You'll instantly feel the softness of the water and notice how clear it stays.
Part of a complete system for lowering chlorine concentration in your spa
According to EPA and Health Canada, no approved spa sanitizer is 100% chlorine (or bromine) free. But with a ClearBlue, you can minimize the concentration, while maintaining water that is safe for you and your family.
Combining ClearBlue with natural enzymes and a non-chlorine shock provides an ideal solution for controlling bacteria and algae in a hot tub or spa while minimizing toxic chemicals.
Keeps protecting while the spa or hot tub is turned off
ClearBlue ions remain in solution and control bacteria in your hot tub or spa even when the pump isn’t running. UV systems, which also help to control bacteria, only work when the spa is on and water is flowing through the UV chamber.
Will not corrode your tub, cover and accessories
ClearBlue ions are completely safe for your tub and cover and will never cause fading or corrosion. Ozone systems, which are frequently installed on spas to help oxidize organic waste, will also corrode your accessories and cover.
Easy, low cost hot tub and spa maintenance
Once the ClearBlue Ionizer is installed, you set it and forget it. The electrodes that contain silver, copper and zinc can last up to three years in a hot tub or spa.
How does it work?
We have been using the ClearBlue Ionizer now for 5 years in both our pool and our hot tub. We are very happy with the results of clear water without the smell of chlorine and the effects of chlorine on swimming suits!
- Fred Webb, CA, United States
It's all about the ions
ClearBlue continuously releases harmless microscopic ions into the water that seek and destroy bacteria, viruses and algae. Ions are picked up by the water as it passes over an electrode that is installed into the plumbing of your pool or spa.
What's an ion?
An ion is a molecule where the number of protons and electrons is different, giving the molecule a net positive or negative electrical charge. Because of this charge, ions are attracted to bacteria, viruses and algae and destroy them on contact.
What's an electrode?
A ClearBlue Electrode is a metal fork that releases ions into the water according to the settings on the ClearBlue controller.
Combines ancient knowledge with modern technology
ClearBlue extracts a proprietary blend of pure elemental silver, copper and zinc ions to cleanse and purify the water, while leaving your skin smooth and soft after each swim or soak.
Controlled at the touch of a button
Ion levels can be adjusted to the size of your pool and tub at the touch of a button. A test kit included with your ClearBlue allows you to test and optimize the levels for your liking.
How do I install it?
The ClearBlue comes with a PVC tee junction that can be placed anywhere in the plumbing of your pool or hot tub. Ideally, it should be placed as close to the water or filter as possible. The tee can be horizontal or vertical.
The ClearBlue electrode which houses the metal that creates the ions is threaded into the tee.
The ClearBlue controller is an electrical device that is fastened to a flat surface near the tee. A cord from the controller plugs into the electrode.
If you buy your ClearBlue at an authorized retail store, they will help you install it. Pat from Leisure Industries explains how below.
What if it doesn't work?
Our customers have been loving the next generation of pool & spa water treatment for almost 10 years.
If you are not 100% satisfied contact us and we'll make it right.
Worst case scenario, we'll refund your money within 90 days of purchase.
Our 5 year warranty covers all manufacturer's defects.